2011 CBR600F tech spec

Following the unveiling of the new 2011 CBR600F earlier this week, Honda has now released full technical specs for the bike.

Surprisingly, the engine seems to be exactly the same as the one found in the CB600F Hornet, the model on which the CBR is based. Perhaps Honda felt that 100 bhp (75 kW / 101 PS) was sufficient for the target audience, and any increase in power might be embarrassing for the 118 bhp (88 kW / 119 PS) CBR600RR?

2011 Honda CBR600F Technical Specification
ENGINE
Type	Liquid-cooled 4-stroke 16-valve DOHC inline-4
Displacement	599 cc
Bore × Stroke	67 × 42.5 mm
Compression Ratio	12 : 1
Max. Power	100 bhp / 75kW / 101 PS at 12,000 min-1 (95/1/EC)
Max. Torque	64 Nm at 10,500 min-1 (95/1/EC)
FUEL SYSTEM
Carburetion	PGM-FI electronic fuel injection
Throttle Bore	36 mm
ELECTRICAL SYSTEM
Ignition System	Computer-controlled digital transistorised with electronic advance
Starter	Electric
Battery Capacity	12 V / 8.6 AH
Headlights	12 V; 60 / 55 W low and high
DRIVETRAIN
Clutch	Wet, multiplate with coil springs
Clutch Operation	Mechanical; cable-actuated
Transmission Type	6-speed
Final Drive	#525 ‘O’ ring sealed chain
FRAME
Type	Mono-backbone; rectangular-section gravity die-cast aluminium
CHASSIS
Dimensions (L×W×H)	2,150 x 740 x 1,150 mm
Wheelbase	1,437 mm
Caster Angle	25°
Trail	99 mm
Seat Height	800 mm
Ground Clearance	135 mm
SUSPENSION
Front	41 mm tension and preload adjustable inverted HMAS cartridge-type telescopic fork, 120 mm stroke
Rear	Monoshock damper with adjustable tension and preload, 128 mm stroke
WHEELS
Rim Size Front	17M/C x MT3.50
Rim Size Rear	17M/C x 5.50
Tyre Size Front	120/70 ZR17M/C
Tyre Size Rear	180/55 ZR17M/C

Honda hasn’t stated what the fuel tank capacity is, but expect it to be the same as the 19 litres (4.1 imperial gallons / 5.0 US gallons) of the CB600F Hornet. There’s no mention of weight either, but the CBR’s fairing should add a bit to the 200.4 kg kerb weight of the Hornet.



Related post:

Honda CBR600F returns